SUS316L stainless steel FPC reinforcing steels:

    FPC patch board is one of the necessary components for electronic product reinforcement. The high precision of the FPC in the production of the FPC is the current alternative to world etching steel. Flat and even without burr, the flatness of flatness is one of the characteristics of FPC.

SUS316L FPC:

Surface stripes, roughness 0.1 UM - 0.2 UM, or 0.3 um-0.4 UM

Surface point, roughness 0.2 um-0.3 UM

Hardness: soft materials (150-200)

1/2h (250-310)

3/4h (310-370)

H of 370 minus 420.

     The characteristic of this material is the nickel content (10-14) %, the magnetic bottom, the material permeability is less than 1.01 UM. It can be coated with nickel, silver, gilding, black, wire, sand and mirror etc.

Product inspection figur
     

SUS316L FPC features:

1,Stainless steel with its beautiful appearance, corrosion-resistant features, non-perishable advantages;

2, the strength is high, not easy to deform, the possibility that thin board USES is large;

3,High temperature, high temperature oxidation and high strength, so it can resist fire.

4, normal temperature processing, welding performance is good, which is easy plastic processing.

5, clean and clean, without burrs; The plane is kept below 0.02 mm, which is suitable for high precision.

The application of SUS304 FPC for reinforcing steel plates:

    Xin Cang Tai  storehouse FPC scope of reinforcing steel used in mobile phones, video phone, laptop computers, aerospace, medical apparatus and instruments, such as digital cameras, automobile instrument suppression module or LCD link parts of FPC, most currently used in the mobile phone camera parts. Traditional FPC reinforcement plate is commonly used to open abrasive stamping molding, stamping process is coarser, however, tolerance, and the accuracy is not high, burr is difficult to clean, easy to circuit boards to form the effects of short circuit or open circuit. The steel chip of Xin Cang Tai FPC is used in the process of chemical etching, etching process to solve the requirement of high precision parts in industrial production.

Product packaging and transportation:

1, the finished product is wrapped in paper, and the bottom is put on the wooden cover to avoid the distortion.

Be careful not to touch moisture, dust, oil, lubricating oil, dust and so on, lest rust or welding be less corrosive.

3, because of high precision stainless steel products with the requirements of physical properties and chemical properties, in the storage and transportation in order to prevent damage, stainless steel products packaging shall be maintained in good condition, and product should be fixed well in order to avoid a collision deformation and corrosion.

     Shenzhen xin bin tai co., LTD., based on years of experience in technology, master the ultra-thin stainless steel belt for high precision strip thickness of 0.02 mm or less, to stress series, can satisfy the terminal for stamping for etching or deformation after heating. Mastered the demagnetization process of austenitic stainless steel more state, according to customer requirements in the production of low magnetic, weak magnetic hard stainless steel belt, to meet the needs of downstream customers.