430 stainless steel car trim bars:

A description of car decoration

Car upholstery is an accessory that is mounted on the edge of the car window and is decorated with a windshield.

Second, the car decorates a material parameter

The material is made of stainless steel and is usually made of sequined stainless steel.

Characteristics of stainless steel materials:

1，Stainless steel with its beautiful appearance, corrosion-resistant features, non-perishable advantages;

2, the strength is high, not easy to deform, the possibility that thin board USES is large;

High temperature, high temperature oxidation and high strength, so it can resist fire.

4, normal temperature processing, welding performance is good, which is easy plastic processing.

5, clean and clean, without burrs; The plane is kept below 0.02 mm, which is suitable for high precision.

Automobile decorative strip production technology

The process of production is to cut off the lathe with a lathe first, then to use the press to repair the edge, the corner of the seam of the seaming of the joint is smooth.

The method of installation of car decoration

1，There are four pieces in the window, three in the rear window, and three in the rear window.

2, the installation of window decorations: generally, is going to install window decorations inside groove of the window to use alcohol wipe up, wait five minutes after alcohol volatilization, again will tear of 3 m adhesive glue on the edge of the window, and then stick, sometimes 3 m glue the window decorations in a cistern, window decorations to death.

Packaging and shipping of stainless steel products:

1, the finished product is wrapped in paper, and the bottom is put on the wooden cover to avoid the distortion.

2，Be careful not to touch moisture, dust, oil, lubricating oil, dust and so on, lest rust or welding be less corrosive.

3, because of high precision stainless steel products with the requirements of physical properties and chemical properties, in the storage and transportation in order to prevent damage, stainless steel products packaging shall be maintained in good condition, and product should be fixed well in order to avoid a collision deformation and corrosion.

Xin Cang Tai storehouse technology has many sets of imported stainless steel processing equipment, precision slitting machine, mirror machine, 8 k mirror machine, precision cut flat plate production lines, can provide stainless steel cutting, slitting, cutting board, automation precision etching processing, grinding, surface treatment and other supporting services, can according to customer needs, provide tailor-made integrated service, all-round to meet customer demand